CALCULATE SHIPPING COST WHEN CHECKOUT
Aristorm Cavitation 2.5
High Quality Aristorm Ultrasonic Cavitation 2.5 Vacuum Body Slimming Skin Care Spa Machine is one of the cavitation r-f body face lifting machine in MyChway. It is mainly helpful to body slimming, fat burning, skin lightening, face lifting, etc. There are sextupole R-F handle, 40K cavitation handle, vacuum quadri-pole R-F handle, 2 pole R-F handle, 8 polar R-F handle, micro-current & photon handle and cold hammer. It is our new products that with strong energy.
Skin Scrubber & Hot Cold Hammer
The ultrasonic skin scrubber adopts the working principle of high-frequency ultrasonic, and the energy emitted by the mechanical vibration of 28,000 times per second has obvious penetration effect on the human skin. It is atomized into small bubbles through ultrasonic cavitation when it meets with water. Through constant vibration, the small bubbles penetrate into the skin pores to split the acne, blackheads, acne and other garbage of the pores into small particles, which are vibrated by high-frequency vibration + ultrasonic vibration To the surface of the skin. Low-frequency emulsification of sebum and secretions blocked by pores, while also sterilizing, atomizing water molecules into the pores, mechanically vibrating, removing excess thick cutin, purifying pores, decomposing oils and smoothing, tightening pores, clearing and smoothing the skin.
Hot Cold Hammer
Using the principle of thermal expansion and contraction, the skin will reduce the metabolic rate at 5 degrees Celsius, slow down the movement of cells, slow down the sensitivity of nerve endings, and play a certain role in inhibiting the pain, swelling, swelling and pain of skin allergies. . Causes of thermal expansion and cold contraction The temperature of 5 degrees Celsius causes the blood vessels to contract, resulting in pore shrinkage, which can improve the enlarged pores and tighten the skin, thereby smoothing facial wrinkles and crow's feet.
Facial Ultrasonic Probe
Using the principle of high-frequency vibration, the high-frequency vibration wave of 28,000 HZ/sec penetrates deeply into the subcutaneous tissue 4-6 mm. Ultrasound has high energy and strong penetration rate, which can drive facial cells to vibrate, not only can export pore oil, but also can change the volume of cells to improve blood circulation, achieve the ability to stimulate cell regeneration, and make the skin shiny and elastic. Secondly, because of the warming effect caused by its high-frequency vibration principle, it also has the function of quickly introducing the beauty nutrient solution into the skin, allowing the skin to better absorb the nutrients in the skin care products.
Power supply Input :100 V-240 V
Power: 190 W
Ultrasonic Cavitation 2.5 Handle
Frequency: 40 KHz
Power: 30 W
6-polar 3D SMART Body R-F Handle
Frequency : 3 MHz
6-polar R-F Vacuum Photon Handle
Frequency :3 MHz
Power :50 W
Vacuum: < -80 kPa
Pressure: >250 kPa
Air flow: > 10 L/minute
Noise level:<70 db(30cm away)
Bipolar 3D SMART R-F Handle
6-pole R-F Face Handle
Photon Micro-current Handle
7 colors : Red, Blue, Green, Purple, Orange, Turquoise, White
Hot and Cold Hammer
Cold Hot Hammer
Cold: 0-5 degree
Hot: 45 degree
Led laser wavelength: 635nm ~650nm
Power of each light: 5mw
Energy output :50 x 5mW =250mw ( 6 big pads *8 light/each+2 small pads * 1 light/each)
Mains power output: 100VA
1 x Ultrasonic Cavitation 2.5 Handle
1 x 6-polar 3D SMART Body R-F Handle
1 x 6-polar R-F Vacuum Photon Handle
1 x Bipolar 3D SMART R-F Handle
1 x 6-pole R-F Face Handle
1 x Photon Microcurrent Handle
1 x Hot and Cold Hammer
1 x Skin scrubber
1 x Ultrasonic probe
2 x Small LED pads
6 x Big LED pads
1 x Power Cord
1 Set Belts
User Photos and Reviews(2 review)
WRITE A REVIEW
lt features functions of body shaping and sculpting, lymphatic drainage, body and facial skin tightening, facial skin care, etc. That means you can offer multiple services to your clients, meeting their various demands.
it's used only for facials and body sculpting rather than curing any disease or pain. When providing body sculpting services to the public with the machine, you don't need a federal license because it's not regulated by the federal government. However, we suggest you check with your state for additional requirements before starting your business.
Yes. The machine presents authentic and measurable results. You can witness a noticeable sculpting effect in 4weeks (vary from person to person). However, the machine only works in certain body parts, and do not expect to see overnight results.
You can use it on many body parts, especially the upper arms, waist, abdomen, and thighs. However, you cannot perform it on your client's head, neck, chest, or back.
The machine provides a safe, non-invasive, and pain-free solution to body sculpting. When low-frequency ultrasound works on our bodies, it causes no harm to tissues or organs.
RF stands for Radiofrequency, which is a non-invasive cosmetic treatment that uses radio waves to heat up the skin tissue and stimulate collagen production. This treatment is used for skin tightening, wrinkle reduction, and fat reduction. During the procedure, a handheld device is used to deliver radio waves to the skin, which heats up the tissue and causes the collagen fibers to contract, resulting in tighter and smoother skin. Cavitation machines, on the other hand, use ultrasound waves to break down fat cells and help reduce the appearance of cellulite. This non-invasive procedure works by creating a low-frequency ultrasound wave that targets fat cells in the targeted area, causing them to vibrate and eventually burst. The released fat is then naturally metabolized by the body and eliminated through the lymphatic system. Both RF and Cavitation machines are popular non-invasive cosmetic treatments for improving skin texture and reducing fat. However, it's important to note that these treatments should always be performed by a trained professional to ensure safety and effectiveness.
RF and cavitation machines are non-invasive cosmetic treatments that have shown promising results in improving skin texture and reducing fat. However, the effectiveness of these treatments may vary depending on the individual's body type, the severity of the skin condition, and the frequency and intensity of the treatments. RF treatments are known to stimulate collagen production, which can result in tighter and smoother skin. Many people have reported positive results after undergoing a series of RF treatments, including improvement in skin texture, reduction of fine lines and wrinkles, and an overall improvement in skin tone. Cavitation machines are also popular for reducing the appearance of cellulite and removing unwanted fat from specific areas of the body. While results may vary, many people have reported a reduction in fat and an improvement in skin texture after undergoing a series of cavitation treatments. It's important to note that RF and cavitation machines should always be used under the guidance of a trained professional to ensure safety and effectiveness. Additionally, these treatments may not be suitable for everyone, and it's important to consult with a healthcare professional to determine if RF or cavitation treatments are appropriate for your individual needs.
When used correctly by a trained professional, RF and cavitation machines are generally considered safe. However, like any cosmetic treatment, there are some risks involved, and it's important to understand the potential risks and complications before undergoing these procedures. RF treatments can cause temporary redness, swelling, and mild discomfort during the treatment. Rarely, more serious complications such as burns, blisters, or scarring can occur if the treatment is not performed properly or if the patient has a pre-existing medical condition that increases their risk of complications. Cavitation treatments are also generally safe, but they can cause some temporary side effects such as bruising, swelling, and mild discomfort. In rare cases, more serious complications such as skin burns or damage to underlying tissues can occur. To minimize the risks associated with these treatments, it's important to choose a reputable provider who has experience performing RF and cavitation treatments. Additionally, patients should disclose any pre-existing medical conditions, allergies, or medications they are taking that may increase their risk of complications. Overall, RF and cavitation machines are safe when used correctly by a trained professional. However, as with any cosmetic treatment, it's important to carefully weigh the risks and benefits and discuss any concerns with a healthcare provider before undergoing these procedures.
The cost of RF and cavitation machine treatments can vary depending on several factors such as the location, the provider, the type of treatment, and the number of sessions required to achieve the desired results. RF treatments typically cost between $200 to $500 per session, with the total cost depending on the number of treatments required. A package of six to eight treatments is usually recommended for optimal results. However, the cost of RF treatments can be higher or lower depending on the provider and the specific treatment plan. Cavitation machine treatments can also vary in cost, ranging from $100 to $500 per session. Like RF treatments, the total cost of cavitation treatments will depend on the number of sessions required to achieve the desired results, which can range from four to eight sessions. It's important to note that the cost of these treatments can vary depending on the provider and the location, and patients should always research and compare providers before committing to a treatment plan. Additionally, some providers may offer package deals or discounts for multiple sessions, which can help reduce the overall cost of treatment.
RF and cavitation machine treatments are generally considered safe, but like any cosmetic treatment, they can cause some temporary side effects. The side effects of RF and cavitation machine treatments may include: Redness: Some patients may experience redness, swelling, or mild discomfort during or after RF and cavitation machine treatments. This is a normal response to the treatment and usually subsides within a few hours. Bruising: RF and cavitation machine treatments can cause bruising, particularly in sensitive areas or areas with thin skin. This usually resolves within a few days. Skin Sensitivity: After RF treatments, the skin may be more sensitive to the sun, and patients should avoid exposure to direct sunlight and use sunscreen to protect the treated area. Skin Burns: While rare, RF and cavitation machine treatments can cause skin burns, particularly if the treatment is not performed properly or if the patient has a pre-existing medical condition that increases their risk of complications. Scarring: In rare cases, RF treatments can cause scarring or changes in skin texture, particularly if the treatment is not performed correctly or if the patient has a pre-existing medical condition that increases their risk of complications. It's important to choose a reputable provider who has experience performing RF and cavitation machine treatments to minimize the risk of complications. Patients should also disclose any pre-existing medical conditions, allergies, or medications they are taking that may increase their risk of complications.
*Get shipping opitons for
Change shipping Country
Discount Code Use Date: 2023.6.1-2023.6.30;
Only one spin per customer
No reward yet！Please check your email box and follow the instructions to get your reward which will be explained in an email.
Spin to Win