Welcome to myChway!

Products

6In1 Skin Scrubber Photon Microdermabrasion Machine Cleaner

High Frequency Sprayer Cooling Face Skin Care Machine Skin Moisturize

  • Model:SR-MJ1806
  • Ultrasonic Skin Scrubber Cleaner
  • High Frequency
  • Microdermabrasion for Reduction of Age Spots
  • Cooling Calm Down Skin
  • Spray Skin Moisturize for Shrink Pores
  • INQUIRY

FEATURES:

1.Mild and soft vibration and heating, without any bad effect on your skin.
2.No effect and negative for skin.
3.A necessary beauty equipment for men and women, young and old.
4.Relax your skin.

COOLING HANDLE

Cooling handle for calming down the skin and shrinking pores.

MULTI-FUNCTIONS

this beauty device have many functions can work together, very suitable for salon use.

Accessories

  • Microcurrent and Photon Handle
  • Model: PT-01BP1
  • Microcurrent and Photon Handle
  • It use natural light waves, which are transmitted by LED into the skin. The light activates photoreceptors in skin cells, producing energy for absorption by skin components, microcurrent to skin rejuvenation It is use on face and body.
  • Cold Hammer
  • Model: PT-01H1
  • Cold Hammer
  • Cold hammer can fast feel cold allowing skin to quickly lock in moisture and further maintain and repair skin, calm down the skin. It use on face and body.
  • Water Spray Jet
  • Model: PT-01S1
  • Water Spray Jet
  • With high pressure, the nutrition and oxygen are sprayed on the skin area which greatly enhance nutrition to be absorbed maximally, skin cleaning and skin rejuvenation. It use on face.
  • Skin Scrubber
  • Model: PT-14E1
  • Skin Scrubber
  • skin scrubber use high frequency ultrasonic wave promote blood circulation and speed up metabolism. Improve cell permeability, use with all kinds of cream essence, smoothes wrinkles, delays skin aging, whitens skin It use on face body

Specification

  • Water Spray Jet
  • Cup capacity7CC
  • Nozzle diameter0.3mm
  • Cold Hammer Handlepiece
  • Treatment AreaUnlimited
  • Measure of Treatment Area6cm²
  • Treatment AreaAir cooled
  • Maximum temperature43℃
  • lowest temperature-5℃
  • Microcurrent+Photon Handlepiece
  • Treatment AreaUnlimited
  • Measure of Treatment Area27cm²
  • Depth of Pressure17 RGB tri-color LED lights
  • Microcurrent frequency62.5KHz
  • Max. Output Power15W

Compare with similar products

Tech Comparision

Microdermabrasion Machine
Microdermabrasion Machine
Microdermabrasion is a non-invasive procedure that uses tiny crystals or other exfoliating surfaces to help remove the superficial layer of dead skin cells.
Microdermabrasion Machine is a method of utilizing the principle of epithelial tissue regeneration. It sprays micro-grains to the deep layer of the epidermis at high speed, stimulates the rapid renewal of collagen and fibrous tissue, and instantly evaporates or destroys skin cells. These scars and aging skins are removed. After that, the treatment site will re-expose the new skin rejuvenation method of the newborn skin. Because it is non-chemical skin rejuvenation, it will not irritate the skin at all. It is the most popular skin care method in Europe, America and Japan.

Background

It is an innovative improvement of the Micro-crystal Dermabrasion. Diamond Dermabrasion offers a non-surgical skin repair procedure that uses a sterile diamond head to abrade or wipe off the top layer of skin and then vacuum the particles with any dirt and dead skin. This procedure removes skin debris, blemishes, blemishes, wrinkles and unwanted pigmentation on the skin. Proper use of Diamond microdermabrasion, in conjunction with skin products that penetrate the top layer of the dermis, helps to replenish natural nutrients, restore cellular activity and promote skin health. The results after Microdermabrasion treatment are usually healthy, glowing, and beautiful skin.


How it works?

Microdermabrasion Machine is a method of utilizing the principle of epithelial tissue regeneration. It sprays micro-grains to the deep layer of the epidermis at high speed, stimulates the rapid renewal of collagen and fibrous tissue, and instantly evaporates or destroys skin cells. These scars and aging skins are removed. After that, the treatment site will re-expose the new skin rejuvenation method of the newborn skin. Because it is non-chemical skin rejuvenation, it will not irritate the skin at all. It is the most popular skin care method in Europe, America and Japan.


Advantage

1.Regulates skin texture, improves dullness, roughness, and uneven skin tone.
2.Improve skin sagging, aging problems, tighten skin.
3.Accelerate melanin elimination, dilute spots (sunburn spots, age spots, and other superficial pigment spots), dark circles.
4.Clean pores, improves large pores, acne, oily skin.
Treat acne scars, pits.


Treatment procedure

1.Treatment area

We can do microdermabrasion treatment at this following area: cheek, forehead, noise around, eye around, chin, etc.


2.Treatment procedure

There are 9 different microdermabrasion tips for you choose:
Tips D240: Eyes and both sides of noise, for wrinkles, all blackhead and acne.
Tips D200: For Scars, fine lines and imperfections
Tips 180: Face, for the large blemishes
Tips 120: body, especially for acne, knee, elbow area and striae of pregancey
Notes: for thin skin person, during treatment will appear red scratches, will be recovered after 1-2 days, not do harm to skin
3. Attention after treatment
You can maintenance your daily life after treatment. Pay attention to the following items within 1-2 days after surgery:
1.Do not make face and shave.
2.do not use exfoliating scrub.
3.Do not go to hot or warm places, such as warmth, soot, hot air, etc.
You should still pay attention to sun protection on weekdays. Wipe the sunscreen or sunscreen to keep your skin beautiful. Use mild and low-stimulation maintenance products according to the doctor\\\\\\\\\\\\\\\'s instructions 1-2 days after surgery, and use special products according to the skin condition after 3 days to achieve the best results.


microdermabrasion treatment

4.Taboo

1. Pregnant women or women during immense
2. Epileptic
3. Patients with malignancy
4. Patient whose wound after operation has not healed up
5. Acute inflammation or epidemic patients
6. Whom with heart diseases or with heart pacemaker
7. Whom with kidney (gall-stone) disease
8. Who was embedded metal object or silica gel
9. Who in menses, birth control period, emoticon incontinence period, or accepting the belly operation


Microdermabrasion compare with hydro dermabrasion

Hydrodermabrasion is a new technology for skin. It involves simultaneous skin infusion of the product combined with amorphous exfoliation. The entire process stimulates collagen production and maximizes blood flow to the skin.
This will have a little different with microdermabrasion skin care treatment. Microdermabrasion is a non-invasive treatment that uses tiny crystals or other exfoliating surfaces to help remove the surface layer of dead skin cells.


Side effects and risks 

Common side effects of microdermabrasion include mild tenderness, swelling, and redness. These usually disappear within a few hours after the treatment.

It is recommended that you use a moisturizer to minimize dry and flaky skin. Minor bruises may also occur. This is mainly caused by the aspiration process during treatment.


High Frequency Technology
High Frequency Technology
High frequency treatments kill bacteria and reduce inflammation, hence the acne-fighting benefits. High-frequency treatments also increase circulation to stimulate collagen, making the treatment an effective anti-aging and glow-boosting tool, too.

Background

Direct high-frequency increases activity in the skin's basal layer, refines skin texture and gives an improvement in the skin's defense against bacteria. It has a germicidal and anti-bacterial effect, due to the ozone formation. It limits sebaceous secretions, drying and healing the pustular infection. Impurities are released by the dilation of skin pores. The improvement of lymphatic and venous blood circulation produces enhanced skin texture and oil and moisture balance.

Because there is no polarity or chemical action with this current, chemicals cannot be driven into the skin. There are no harmful effects on the nerves or muscles. Indirect High Frequency passes through the surface of the body and produces a stimulating anti-congressive effect, with no chemical formation on the skin's surface. The generated warmth produces a relaxing, sedative effect, relieving tension with the same skin benefits as Direct High Frequency.


How does it work?

The tool itself looks like a stick with a small bubble at the end - this bubble is the electrode. The electrode produces argon (a gas that is good for the skin) and emits a small current. Professional beautician Kerry Benjamin says that when applied to the skin, it produces oxygen, kills bacteria and soothes inflamed skin.

The glass electrode is in direct contact with the skin. The current is scattered in contact with the patient, and the effect is very beneficial to the skin because the effect is concentrated around the electrodes. It has bactericidal and bacterial effects that greatly reduce acne.


Who is suitable for the Treatment?

1. This is a safe procedure that can be carried out for men and women, including adolescents with mild to moderate acne.
2. It is also suitable for treating just one spot before a special occasion such as a Wedding.
3. Applicable to patients with acne on the back, chest and another body surface.


Treatment Area

The generated warmth produces a relaxing, calming effect, Wrinkle Remover, skin rejuvenation, relief of tension and skin benefits with direct high frequency. Such as Cheeks, Forehead, Neck, Chest, Back, Eye Area, etc.


high

The Main Differences Between Orange and Violet High-Frequency Electrodes

High-quality high-frequency electrodes are usually made of tempered glass, and the electrodes are filled with two kinds of gases: one is argon, which emits a weak purple glow; the other is helium, which emits an orange glow. The high-frequency electrode is a safe conductor of the current. High frequency is a good overall treatment that provides many benefits for skin care attention, from acne to wrinkles.


the

Technical parameters

1. Voltage: 110V/240V
2. Working Frequency: 50-60HZ
3. Power: 10W


Advantage

1. Acne improvement
2. Reduce enlarged pores and blackheads
3. Fine lines, wrinkles and sagging skin softening
4. Reduce eye puffiness
5. Fading of dark circles
6. An Improvement In The Appearance of Cellulite
7. Healthier Hair Growth


Treatment procedure

1)Suggestion on Treatment
Treatment time: It is safe to use every day. Depending on the severity of the acne, you can spend 15 to 20 minutes a day using the device, or in a smaller area in just 5 minutes.

We recommend at least 6-8 treatments per week, followed by maintenance.

2)What steps are involved in the Treatment?
1. The skin will be cleaned with acne cleanser to ensure no grease.
2. The skin is further prepared for electrical therapy.
3. Exfoliation treatment was carried out using a vitamin C activated scrub.
4. High-frequency processing will use glass electrodes for 8-10 minutes
5. An oxygen-filled mask will be applied to the skin.
6. End of treatment with acne serum and oil-free moisturizer.

3)Cautions
High-frequency facial care is considered to be a safe and gentle treatment for young skin, but the following contraindications should be noted:
1. Cancer
2. Acute infectious diseases and fever, nausea
3. Inflammatory disease, Epilepsy, Haemophilia
4. High blood pressure or low blood pressure\heart disease
5. Avoid frequent use of aggressive AHA or glycolic acid products as they can over dry the skin, especially during the winter months.
6. Avoid treatment of capillary rupture, areas of spider veins and rosacea, as high frequencies may exacerbate these conditions.
7. Do not use if you are pregnant, have a pacemaker or history of heart disease.
8. Avoid wearing metal jewelry during high-frequency treatment to avoid the risk of shock.
9. Do not operate the high-frequency system if the lamp is broken.
10. Never use outdoors, near water, or near combustible materials


High-frequency compare with Microcurrent

1. Microcurrent side effects include nausea, fatigue, drowsiness, and temporary flu-like sensations, High-frequency will not.
2. Short treatment time and get a better result.


Side effects and risks 

1. Treatment is mildly uncomfortable.
2. High frequencies are considered to be very safe. The possible side effects are very limited and all side effects are relatively mild (eg, short-term skin irritation).


Related Treatments

Related Products

Customer who viewed this product also viewed

YH-5303
  • 3D Smart Bipolar RF heating of the collagen
  • Quadrupole RFanti-aging
  • Diamond Dermabrasion for Skin Rejuvenation
  • Vacuum Spray treat various pruritus
SR-NF905B
  • Scrubber Exfoliating
  • Bio Lifting
  • Microdermbarasion Black head removal
SR-NF903
  • Scrubber Exfoliating
  • Dermabrasion Black head removal
  • Ultrasonic skin rejuvenation
SR-MJ1805
  • Ultrasonic Skin Scrubber Cleaning
  • Microdermabrasion Black Head Removal
  • Cooling Calm Down Skin
  • Shrink pores
SR-MJ1805P
  • Microcurrent+Photon Handle for Skin Rejuvenation
  • Microdermabrasion for Dead Skin Removal
  • Cold Hammer for Shrink Pores
  • Spray for Skin Moisturize
  • First Name
  • Last Name
  • Email*
  • Phone
  • Subject
  • Message*
  • main_img
  • 6In1 Skin Scrubber Photon Microdermabrasion Machine Cleaner
  • Ultrasonic Skin Scrubber Cleaner
  • High Frequency
  • Microdermabrasion for Reduction of Age Spots
  • Cooling Calm Down Skin
  • Spray Skin Moisturize for Shrink Pores