Made of high quality material, study and durable,
It has a long service time,
Easy to operate, can meet your demands.
MAIN TECHNICAL PARAMETERS:
Voltage: 110V 60Hz
Maximum Speed: 4000 r/min
Capacity: 20 mlx6
Maximum Relative Centrifugal Force: 1790g
Test Tube: height 10cm, diameter 2cm
Time Range: 0~60min. or without Limit
Color: Silver Gray
Put the machine on a level and strong table and keep the working room clear, dry and ventilated. Indoor temperature 5- 32℃ is OK.
There is a timer control knob for up to 60 minutes and a second knob for speed.
First, add some material which needs to be separated to 20 ml centrifuge tubes, then insert them to 12 holes or 6 holes respectively(but the number of the material in each centrifuge tube must be almost equal), close the cover plate, connect to the power (this machine has random power cord, just directly insert into the instrument and the outside power outlet, then close the power switch), the indicator lights. Next, adjust the work time to where you need or the normally closed position (counterclockwise end point), now the centrifuge is working condition.
Shut the power switch, open the cover of the machine, clear the rotor and container.
Note: when centrifugal tubes are centrifuged, and the volume of liquid in each centrifugal tube must be the same.
(Based on 0 Reviews)Write a Review
Ask a New Question
What would you like to ask about?
Customer who viewed this product also viewed
Thanks for your click!
would you like to participate in a short feedback survey before you going?